Image - Cacao Pod Vessel - K6706 © Justin Kerr FAMSI © 2004:
Ronald A. Castanzo
 

Tepeaca Kiln Project
Vea este informe en Español.

 

Figure 5. Photograph of the excavation 623 (Suboperations A-1 and A-2).

Research Year:  2003
Culture:  Aztec
Chronology:  Pre-Classic
Location:  Puebla-Tlaxcala Basin, Central México
Site:  Tepeaca

Table of Contents

Summary
Resumen
Introduction
Survey
Excavations
Discussion
Conclusion
Acknowledgements
List of Figures
Sources Cited

Summary

The Tepeaca Kiln Project is concerned with the evolution of pottery production and distribution and the processing of lime in the central highlands of México. From 1994-1998, the Acatzingo-Tepeaca Project (PAT) found evidence of dense prehispanic settlement in the central Puebla-Tlaxcala Basin, including the remains of hundreds of ancient kilns. The Tepeaca Kiln Project is focused broadly on the investigation of these features and has three major objectives: (1) locating the features discovered by PAT and determining whether or not they represent ancient kilns, (2) ascertaining the function of the kilns, and (3) characterizing the level of organization (household vs. non-household) and the degree of craft specialization associated with the use of the kilns. In the summer of 2003, the project concentrated on a 3.2 km2 area to the north of the town of Tepeaca, in which a total of 86 kilns were located, most believed to date to pre-Contact times. Both kilns believed to have been associated with ceramic production and kilns that apparently functioned in lime processing were found in the survey. Three lime kilns were excavated, one of which dates to the early Middle Formative Period, another to the early 20th century; to date, radiocarbon dating has not been done on material from the third excavated kiln. Although speculative at this time, low intensity production representing at best a part-time level of specialization is suggested by the available data for Middle Formative lime processing.

Resumen

El Proyecto de los Hornos de Tepeaca se refiere a la evolución de la producción y distribución de la cerámica y el proceso de la cal en el Altiplano Central de México. A partir de 1994-1998, el Proyecto Acatzingo-Tepeaca (PAT) encontró evidencia de asentamiento prehispanico denso en la Cuenca de Puebla-Tlaxcala central, incluyendo los restos de los centenares de hornos antiguos. El Proyecto de los Hornos de Tepeaca se enfoca ampliamente en la investigación de estes rasgos y tiene tres objetivos importantes: (1) localizar los rasgos descubiertos por PAT y determinar si o no ellos representen los hornos antiguos, (2) determinar la función de los hornos, y (3) caracterizar el nivel de la organización (casa contra no-casa) y el grado de especialización artesanal asociado con el uso de los hornos. En el verano de 2003, el proyecto concentró en un área de 3.2 km2 al norte del pueblo de Tepeaca, en el cual un total de 86 hornos fue encontrado, el más creído para fechar a tiempos pre-Contactos. Ambos hornos creídos para haber sido asociados a la producción de alfarería y los hornos que funcionaron al parecer en el proceso de la cal fueron encontrados en el recorrido. Tres hornos de cal fueron excavados, uno de los cuales fecha al Período Formativo Medio temprano, otro al siglo XX temprano; hasta la fecha, el fechamiento radiocarbonico no se ha hecho en el material del tercer horno excavado. Aunque es especulativo en este momento, la producción de intensidad baja que representa por lo más un nivel de especialización de medio tiempo es sugerida por los datos disponibles para el proceso de cal durante el Período Formativo Medio.


Click to download the report in PDF format:

Tepeaca Kiln Project  (1.11 MB)

The PDF files require Adobe Acrobat Reader.
To download the latest version, click the Get Acrobat Reader button below.

Get Acrobat Reader

Submitted 12/24/2003 by:

Return to top of page